These instructions will install both the USB drivers and Intellisync (the screen shots below are for Windows XP, but the dialogs are much the same for other versions of Windows.):

Place the CD into the CD drive of your PC, your browser should be automatically started with the following page displayed:

Select the option "Copy Intellisync and USB drivers installation option. This will copy the install file to your PC.

Run the installation file copied on to your PC, the following screen should be displayed.

Click on the Next button.

Click on the Install button.

Now connect your Zaurus to the PC using the USB cable. The following dialog should appear

Select No, not this time and then click on the Next button.

Click on the Next button. Click on Next or Continue until you get to the following dialog.

Now from the Start menu select Intellisync for Zaurus->Communication Options:

Click on Zaurus Manager and following dialog should be displayed:

Select USB - TCP/IP (Advanced) in the top field - Connections. The following dialog will be displayed, click OK. Click OK on the subsquent dialog and assuming your Zaurus is still plugged in you should see the following dialog:

Follow the settings on the folling dialogs:

Click Continue Anyway

As it suggests re-boot in order for the drivers to take effect. The USB drivers and Intellisync are now installed.

Run Intellisync

You should now be able to run Intellisync. Note: If you wish to Sync with Palm Desktop, then install this first.

When synchronising make sure your Zaurus is connected and switched on. From IntelliSync for Zaurus in the Start menu, select Sync Options and following dialog is displayed:

set up the sync how you want it.

Once configured you can run a synchronisation from IntelliSync for Zaurus in the Start menu by selecting the Synchronize option.